|
38 Irwin specs
38 Irwin profile
38 Irwin photos
1983 IRWIN 38 CENTER COCKPIT SLOOP
LOA: 40’ 1” LWL: 38’ 2” BEAM: 12’ 3” DRAFT:
4’ 6”
DISPLACEMENT: 20,000# BALLAST: 6,000#
MAST HEIGHT: 54’ SAIL AREA: 771 sq ft
FUEL CAPACITY: 60 gallons in fiberglass tank
WATER CAPACITY: 145 gallons in two plastic tanks
DESIGNER: Ted Irwin BUILDER: Irwin Yachts; Clearwater, FL
ENGINE: Perkins 4-108 four cylinder fresh
water-cooled 50 hp diesel. Single lever engine controls on binnacle. Engine
instruments on binnacle include tach, water temperature, oil pressure, and amp
meter. Racor fuel filte, bronze raw water strainer, water lift exhaust, fixed
three blade prop.
ELECTRICAL: 12v system with four 6v house batteries and one 12v starting
battery, selector switch, 12v breaker panel with DC volt meter, Wind generator.
110v system with 110v breaker panel, shore power cord.
SAILS AND RIGGING: Masthead sloop rigged. Painted aluminum mast, boom and
spreaders. Stainless steel standing rigging with double lower shrouds. Two
Barlow #16 halyard winches on mast, two Barlow #27 jib sheet winches, one Barlow
#16 main sheet winch. Six to one purchase main sheet aft of cockpit. Sails
include roller furling main and genoa.
ADDITIONAL EQUIPMENT: Wheel steering with brake and guard, Gemini binnacle
compass, VHF, Raymarine ST 5000 AP, RL70C Radar, Datamarine Depth Standard Depth
Sounder, AM/FM CD stereo, 12v/110v TV/VCR, 12v refrigeration. Hillerange three
burner propane stove with oven, 16,000 btu air conditioning, Stainless steel bow
and stern pulpits, Stainless steel stern mount swim ladder, Double life lines
with gates port and starboard, Teak and aluminum bow sprit with double anchor
rollers, 35# CQR anchor w/50’ chain and 150’ rode, Danforth w/50’ chain and 150’
rode, Pressure water/shower, 110v/heat exchanger hot water heater, electric and
manual bilge pumps, Two marine heads with holding tanks and Y valves, Bimini,
Cockpit cushions.
LOCATION: St. Petersburg, FL
PRICE: $39,900
particulars believed correct but not guaranteed
|
